|
|
|
Technical Bullitens 1. Specifying Concrete/Masonry Stains 2. 100% Acrylic vs. Styrene-Acrylic based Masonry Stains 3. Recoating 4. Application Over “Hot” Concrete Surfaces 7. Application to Tile Roof Surfaces
|
CANYON TONE STAIN has been successfully used to protect thousands of structures throughout the world. It has become the overwhelming choice of discerning Building Owners, Architects and Engineers for use on precast or cast-in-place concrete, masonry, brick, stone and stucco. CANYON TONE STAIN is integrally locked into the surface pores of the substrate as a result of its low viscosity and microscopic penetration qualities. It allows moisture vapor to “breathe” from the building interior while providing excellent water-repellency on the exterior through the use of hydrophobic resins.
CANYON TONE CLEAR combines reactive silane and a silicone emulsion in a single product designed to provide transparent protection over above grade concrete, masonry, aggregate, brick and stucco surfaces. The silane penetrates deeply into the substrate, chemically locking into the concrete or masonry matrix for permanent moisture, chemical and salt protection. The silicone emulsion bonds tightly to the surface for optimum water-repellency and ability to bead. CANYON TONE CLEAR is effective against the harmful effects of water, de-icing chemicals, chloride-ion intrusion, freeze/thaw exposure, spalling, airborne pollution and acid rain. It is ideal for use on building exteriors, parking garage floors and ramps, walkways and decks, and other areas where a clear, non-yellowing protective sealer is required.
Canyon Tone Clear Performance Testing - August 1999
The silicone resin network structure is not only
extremely stable, it keeps water at bay while allowing water vapor to
escape. |
||||||
 | |||||||
PRODUCTS
